Open/close controller (230V AC or 12-24V UC), 2 NO (FMP)


General information
The UMS electronic controllers are general-purpose AC motor controllers for clockwise or anti-clockwise operation. They support both one-button and two-button motor control.
The overriding auxiliary inputs allows several UMS units to be grouped together in group control or central control configurations.
The motor run time can be limited to prevent motor overload due to mechanical jamming or other causes. A convenient and configurable automatic closing function ensures that skylights or other fixtures are not inadvertently left open. In louvre blind mode the louvres can be adjusted precisely or automatically returned to a defined angle after switch-off.

Roller shutters and louvre blinds, shutters, skylights, smoke extraction hoods in fire protection systems, door drives, valve drives, etc.

Special features
- flush mounting version
- very low power consumption: only 0.2W passive / 0.4W active
- positioning of blinds also by group or central control
- One or two button control
- Electronic button interlock enables use of normal push-buttons
- Specific louvre blind modes for convenient louver adjustment and privacy function
- Automatic closing function with configurable closing time; long button press doubles closing time
- Run-time limiting for motor protection

NEW: Now also available as a variant in 12-24V UC. Operating and control voltage of UMSU5V is 12-24V UC. With its potential-free outputs, it is possible to control shutters / blinds, regardless of the motor supply voltage - therefore it also can be used if several motors with different phases should be controlled with one control line.

Technical data: UMS U5 (230V AC)

Type: UMS U5 (230V AC)
Item no.: UMSU59
EAN: 4046929401036
Specifications: 230V AC, 2 NO 10A
Dimensions: 43 x 43 x 18.5 mm

Technical data: UMS U5 (12-24V UC)

Type: UMS U5 (12-24V UC)
Item no.: UMSU5V
EAN: 4046929401166
Specifications: 12-24V UC, 2 NO 10A (potential-free)
Dimensions: 43 x 43 x 18.5 mm

Go back